Riedlinger Strasse 42

88400 Biberach, Germany

Band Saw Sharpener

AM 70

for NV tooth

Fully automatic band saw sharpener for NV toothed narrow band saw blades with setting unit

Machine can also be used to sharpen CV circular saw blades

AM 71

for NV tooth

Fully automatic band saw sharpener for NV toothed narrow band saw blades without setting unit

Machine can also be used to sharpen CV circular saw blades

DINASAW sharpener

Dinasaw MSA Bandsaw Sharpeners allow you to improve your saw’s cutting efficiency by optimising tip angles. Better tooth penetration and chip removal means blades cut faster, more accurately and stay sharp longer.  It’s all about the teeth – they do the work – improving the teeth’s geometry increases cutting speed and accuracy while decreasing frictional heat and sawdust packing.

Normal sharpeners can only sharpen perpendicular to the blade – the patented Dinasaw MSA sharpeners can also sharpen with a positive 10degree angle across the set teeth’s tips to enhance cutting and sawdust extraction.

The saw’s set teeth do the majority of the work and angling their cutting face produces larger chips that are directed towards the centre so they are better retained in the gullet.

Standard, straight sharpened teeth generate smaller chips that are forced directly down to spill beside the blade causing friction that heats and buckles the blade.

The benefits
  1. Saws stay sharper longer
  2. Less sawdust remains on lumber
  3. Teeth require less set

Dinasaw’s range of Bandsaw sharpeners are the most accurate, versatile and cost effective machines available.

The Manual machine is operated by turning a handle. One turn of the handle will sharpen one tooth.

The Fully Automatic machine is just that. Automatic. Controlled by state of the art electronics, this machine is able to monitor how many times the blade has gone around the machine and shut it off automatically at a predetermined point. Software driven softstart means the machine can be fitted with ABN or CBN grinding wheels without excess current draw.

  • Sealed ball bearings
  • Case hardened cams and pivots
  • High efficiency 12 volt motors
  • Unique magnetic blade clamping
  • Video assisted instruction manuals
  • Free standing Tripod frame

This means unrivalled control you can now control the cutting angles to produce superior blades for more production with fewer miscuts.

Magnetic Blade Retention is used on all Dinasaw sharpeners providing uniform clamping pressure, allowing fast, easy changing and precise control over blade movement.

Microprocessor Control means you have complete control over the number of times you wish the blade to be sharpened.

for WM tooth

  1. Manual STD Manual operation, straight teeth only
  2. Manual MSA Manual Operation with Bevel sharpening option (MSA).
  3. Automatic STD Sharpens the blade then shuts off automatically, straight teeth only.
  4. Automatic MSA As above with MSA fitted.
Blade Width Max. 75mm (3") 75mm (3")
  Min. 16mm (5/8") 16mm (5/8")
Blade Thickness   Any Any
Tooth Pitch Max. 38mm (1 1/4") 38mm (1 1/4")
  Min. 8mm (5/16") 8mm (5/16")
Power Req.   12vdc 12vdc
Weight Net 16kg (35lbs) 20kg (44lbs)
  Gross 21kg (43lbs) 24kg (55lbs)
Feed Speed   Manual 30 tpm
Grinding Wheel Dia. 125mm (5") 125mm (5")
  Speed 6000 rpm 6000 rpm
MSA.   Optional Optional
Control   Manual Microprocessor